Guides & resources
Set up, tune, and get the most from your gear
Browse 14 install and tuning guides, plus interactive wiring diagrams.
Wire your subs the right way
Choose your coil type, impedance, and subwoofer count to find a supported wiring diagram.
Step 1 · Coil type
What type of subwoofer do you have?
Check the label on the back. It will read SVC (single) or DVC (dual).
All guides
14 guides
Amplifiers
Amplifier settings
Understand each setting on a monoblock amplifier — LPF, subsonic, bass EQ, gain, phase, and master/slave — so you can tune correctly.
Read guide
Amplifiers
Resetting amplifier protection
Protection mode means the amp shut down to save itself. Disconnect everything for several hours, then reconnect.
Read guide
Amplifiers
Amplifier Installation Guide
Install RP, SA Series, and SK-M amplifiers with the correct manual, fused power, grounding, signal connections, and speaker load.
Read guide
Amplifiers
Choosing the right wiring kit
Match wire gauge and material to your amp's terminal size and RMS power. Bigger isn't always required — but it doesn't hurt.
Read guide
Subwoofers
Coil configurations (SVC vs DVC)
Voice coil layout decides what impedance loads you can wire. Pick based on your amp, not the other way around.
Read guide
Subwoofers
RMS vs peak power
RMS is what the sub or amp actually handles continuously. Peak is a short-burst rating — match by RMS, not peak.
Read guide
Subwoofers
Subwoofer break-in
Loosen the suspension over the first 24–36 hours so the sub plays at its full rated capacity.
Read guide
Subwoofers
What size subwoofer is right for me?
Cone size trades depth for accuracy, and your vehicle and music style both factor in.
Read guide
Enclosures
Choosing an enclosure
Airspace, mounting depth, cut-out diameter, and style — the four specs that determine if an enclosure works for your sub.
Read guide
Enclosures
Prefabricated enclosures
Skar Audio sells engineered enclosures matched to specific subwoofer lines. Check the Box Info tab for compatibility.
Read guide
Enclosures
Custom enclosures
Skar Audio doesn't design custom boxes, but provides the TS parameters and Box Info you need to design your own.
Read guide
Speakers
Component vs coaxial speakers
Coaxial = simple plug-and-play. Component = flexible, customizable sound stage. Pro Audio = high-power tweeters and mids for loud builds.
Read guide
Wiring & Power
Fuses
Fuses protect the wire and your vehicle from short-circuit fire. Match the fuse rating to what's recommended on your amp's spec sheet.
Read guide
Wiring & Power
OFC vs CCA wire
Same gauge, very different current capacity. OFC carries more power and lasts longer; CCA is the budget pick for systems under 2000W.
Read guideLooking for product-specific help?
Find manuals, product questions, and warranty information in our Help Center.